KLINGERSIL® C-4500
Characteristic & main applications
Premium quality high-pressure gasket especially suitable for use with high temperature alkaline media and superheated steam. A superior performance product designed for use in the chemical industry.
Material
Carbon fibres and special heat resistant additives bonded with NBR.
- In area one, the gasket material is normally suitable subject to chemical compatibility.
- In area two, the gasket materials may be suitable but a technical evaluation is recommended.
- In area three, do not install the gasket without a technical evaluation.
Technical Data -Typical values for 2 mm thickness
- Compressibility ASTM F 36 J : 11%
- Recovery ASTM F 36 J : min. 60%
- Stress relaxation DIN 52913
- 50 MPa, 16 h/300 °C : MPa 32
- 50 MPa, 16 h/175 °C : MPa 35
- Stress relaxation BS 7531, 40 MPa, 16 h/300 °C : MPa 30
- Klinger cold/hot compression 50 MPa
- thickness decrease at 23 °C : 10%
- thickness decrease at 300 °C : 15%
- Tightness accDIN 3535/6, mg/sm : 0.1
- Thickness increase ASTM F 146
- oil JRM 903, 5 h/150 °C : 3%
- fuel B, 5 h/23 °C : 5%
- Density g/cm3 : 1.6
- Meets the technical requirements of BS 7531:2006 Grade AX