SAFETY SPRAY SHIELD AND FLANGE PROTECTORS

FLANGE SHIELDS

Polyethylene

• Transparent, reinforced polyethylene fabric.

• Multi-layered construction.

• Tough poly thread and draw cord.

• Maximum operating temperature of 76°C

Polyethylene

• Solid woven polypropylene fabric.

• Multi-layered construction.

• Insert in centre provides 4th protective layer.

• Polypropylene thread and draw cord.

• Maximum operating temperature of 93°C

• Available with FEP Teflon clear window

PVC

• Reinforced polyvinyl chloride fabric.

• Multi-layered construction.

• Tough poly thread and draw cord.

• Standard colour is safety orange. Yellow and other colours available upon request.

• Maximum operating temperature of 76°C

• Available with clear PVC window

• Entire clear PVC model available

Standard Teflon®

• Teflon® coated glass cloth.

• Reinforced, multi-layered construction.

• Teflon® coated fibre glass or Nomex® thread and draw cord.

• Fire resistant.

• Maximum operating temperature of 232°C

Premium Teflon®

• Maximum Teflon® content fabric for extreme service and long life.

• Multi-layered construction.

• Teflon® coated fibre glass or Nomex® thread and draw cord.

• Fire and tear resistant.

• Max operating temperature of 232°C

• UV stabilized.

• Also available in 100% Teflon for maximum life in demanding applications.

Clear Teflon ®

• Clear Teflon® centre strip allows for complete visual inspection.

• Sides constructed of Premium Teflon® coated glass cloth.

• Teflon® coated fibre glass or Nomex® thread and draw cord.

• Fire and tear resistant.

• Teflon® drain nipple optional.

• Max operating temperature 204°C

EXPANSION JOINT SHIELDS

• Available in same fabrics and styles as Flange Shields.

• Clear Teflon is recommended for viewing of bellows.

• Allows for lateral movement, while maintaining fit and Protection.

• Available for all styles and types of Rubber, Stainless, and Teflon bellowed expansion joints, regardless of manufacturer.

• Recommended by most manufacturers of expansion joints.

VALVE SHIELDS

• Available in same fabrics and styles as Flange Shields.

• Allows for operation of valve handle or hand wheel.

• Bonnet Shields allow for travel and opening and closing of gate or globe valve.

• Manufactured to fit all styles and types of valves:

• Ball ,Check, Butterfly, Gate, Plug Diaphragm , Control, Globe.

I & E COVERS

• Designed to fit instrumentation, electronics, controls, expensive and delicate equipment.

• Increases life and protects from corrosive environments.

• Clear Styles allow for viewing of positioner and actuator.

• Custom fit, regardless of length and size.

STAINLESS STEEL

Style 1 Band Type

• 316 stainless steel construction.

• Layers of stainless netting absorb and dissipate pressurized spray.

• No tools required, installs quickly via adjustable quick latch.

• No sharp edges.

• Excellent for high temperature and pressure.

• Recommended for steam, flammables, and fire protection.

• Max temperature 1093°C, max pressure 3000 psi.

Style 2

• Slotted overlapped edges prevent lateral spray out.

• Spacer rods raise shield off flange to dissipate pressure.

• Excellent for high temperature and pressure.

• Recommended for steam, flammables, and fire protection.

• Max temperature 1093°C, max pressure 3000 psi.

Flange Band Protectors

• Designed to cover flanges to protect flange faces, stud bolts, and gaskets from corrosion.

• Keeps out moisture, chemicals, salt water, acid rain, etc.

• Keeps out foreign matter, which is critical on systems that are cathodically protected.

• Available in 316 stainless steel and Kydex plastic.

• 316 stainless steel worm gear clamp.

• 316 stainless steel injection fitting

• Gasket liner of closed cell neoprene, maximum operating temperature of 82°C.

• Optional EPDM rubber gasket liner, maximum operating temperature of 132°C.

• Safety relief valve optional, bleeds at 5 psi.

• Available for all size flanges.

• Optional liner of Teflon® or silicone for chemical and high temperature applications.

• Custom engineered designs available per application.

Nut and Bolt Caps

• Designed to protect hex nuts and stud bolt ends from corrosion, thus allowing easy unbolting.

• Eliminates need of a torch for nut removal.

• Keeps out moisture, chemicals, salt spray, and paint build up.

• Moulded from UV, chemical, and weather resistant polyethylene plastic.

• Simple and easy to install.

• Economical and reusable.

• Constant temperature of 77°C.

• Standard & custom sizes available