RUBBER METAL GASKET
Rubber-metal gaskets have secured a fixed application range in the world of gasket technology. Wherever safe sealing of media with an extremely low leakage rate and low joint loads at relatively low temperatures is required, rubber-metal gaskets provide the best possible solution.
Klinger has a range of flange gaskets which it manufactures made from a combination of rubber and steel as well as the patented variable wedge type rubber seal that consists of two interlocking parts connected through a tongue and groove joint.
The application that these gaskets can be used on are:
- Water
- Gas
- Waste water
- Chemicals subject to compatibilty
The flange types that they can be used on are:
- Plain steel, stainless steel
- Cast iron
- GFK (Glass fibre reinforced plastics)
- PP/PVC/PE
- Coated Flanges
The gaskets are available in various grades of rubber. Consult Klinger/PT Loka Manggala.
NR – Natural rubber
NBR – Nitrile
EPDM – Ethylene Propylene
CSM – Hypalon
FKM – Viton
Styles available are:
S = gasket thickness
d₁ = inner diameter
d₂ = outer diameter
Style KGS
Vulcanized rubber mixture, lens-form, rounded at the edges, vulcanized steel ring inside.
s₁ = thickness of the “spear tip”
s₂ = gasket thickness
d₁ = inner diameter
d₂ = outer diameter
Style KGS/S
Vulcanized rubber mixture, lens-form with moulded spear tip (cross section view) at the inner rim, rounded at the edges.
s₁ = thickness of the “spear tip”
s₂ = gasket thickness
d₁ = inner diameter
d₂ = outer diameter
Style KGS/TK
Similar to KGS/S except it has square section on outside dimension.
Style KGS/VD
Adjustable seal allowing the new seal to act as a simple and economic sealing device for obliquely positioned flanges. Oblique positions can be infinitely aligned up to approximately 8°vertically or horizontally. Installation instructions supplied with gaskets.
Style G-ST-P/S
The G-ST-P/S profile gasket combines the advantages of its individual parts.
Style G-ST-P/KN
The G-ST-P/KN profile gasket offers best solution to deforming and moulding characteristics exhibited by G-ST profile gasket when extreme stresses occur during installation.